Fibre-Tec is a fluorocarbon, water based, stain and soil repellent that protects carpets against oil and water based stains and repels dry soil thus improving the carpets appearance after vacuuming. |
The best overall protection you can give a carpet for stain resistance and anti resoiling. The performance is guaranteed and nothing else will do the same job.
Fibre-Tec protects the carpet from oil based stains and resoiling from dry dirt better than a silicone product, but care must be taken to apply it according to directions.
Caution: When diluting, water must be added to the concentrate.
Dilute as follows;
For damp carpet, do not dilute, use as is. Apply at 200 sq. ft. per gal.
For damp carpet, dilute one gallon of Fibre-Tec 1:4 with 4 gallons of water to make 5 gallons of ready to use. Apply at 200 sq. ft. per gallon.
For damp carpet, dilute one gallon of Fibre-Tec 1:9 with 9 gallons of water to make 10 gallons of ready to use. Apply at 200 sq. ft. per gallon.
On dry carpet one gallon of ready to use mixture with one gallon of water to make 2 gallons of new mixture for dry carpets. Apply this mixture at 100 sq. ft. per gallon. Immediately after applying, brush product into carpet. For retreatment use half the normal concentration.
HAZARD WARNING: Non- Hazardous.
PRECAUTIONS: Keep way from flame and materials heated above 480F. Wear impervious gloves & chemical splash goggles.
FIRST AID: Contact- Flush with water.
Ingestion - obtain medical help immediately.
READ MATERIAL SAFETY DATA SHEET BEFORE USE.
KEEP OUT OF REACH OF CHILDREN
DO NOT REUSE THIS CONTAINER
Appearance: White Milky Liquid
pH: 7- 8
Specific Gravity: 8. 7 lb/gal
Flash Point: None
Dilution: See Directions
Storage: Do not freeze or heat over 480