Invade, a paint, oil, grease and tar remover that can be used with water or solvents. Grease, tars, paint, ballpoint inks, shoe polish lacquers, furniture stains and copy toners are some of the spots that can be removed from carpets, fabrics or hard surfaces.|
Invade works better than volatile solvents because it dissolves the spots and holds it in suspension while it is being flushed out.
It's easy to use, it's economical, it brings solvency directly to the spot and continues action until it is removed, and is safe on most fabrics.
Invade can be applied in its concentrated form or diluted with water or solvents and sprayed on.
For local spots simply apply invade to the spot and agitate with bone scraper or the fingers (wear rubber gloves). Allow to set for a few minutes to dissolve the stain then flush it out with solvent or water. Repeat if necessary. With tarlike substances you should allow more time to dissolve before rinsing.
HAZARD WARNING: Combustible; Inhalation, eye and skin irritant
PRECAUTIONS: Inhalation-Use only in well ventilated room.
Avoid prolonged breathing of vapors. Use appropriate respiratory protection if PEL or TLV is exceeded.
FIRST AID: Inhalation - remove to fresh air. Get medical help.
Eyes - flush with water.
Skin -Wash with soap and water.
Ingestion - Do NOT induce vomiting. Get medical help.
READ MATERIAL SAFETY DATA SHEET BEFORE USE.
KEEP OUT OF REACH OF CHILDREN
DO NOT REUSE THIS CONTAINER
Appearance: Clear colorless liquid
Specific Gravity: 85 (H20=1.0) Flash
Point: 125 F
Dilution: Use as is or dilute with solvent or water
Freeze/Thaw: Does not freeze
Storage: Store in closed containers